Jumper T-16 Type in Radio Battery and Charger Kit
USB-C Internal Charger 5000 mAh Battery
The Jumper T-16 RC radio and controller has revolutionized the market for an affordable,
highly capable and well made radio and is on the market at a third of the price of it’s
nearest competitor. The ability to run both an internal and external radio module, color
screen, all the switches and controls any RC modeler could wish for at a price well
under $200 has made this radio almost a cult item. And now that Open TX is readily
available and supported, owning this radio a no brainer.
Unlike it’s much more expensive competitors, the original
versions of the T-16 do not come with bstteries nor an internal
charger. They are supplied with a holder for 2 18650 batteries and
require purchasing the batteries (avoiding the many fakes on the market) and a
charger. The radio must be opened and the battery holder needs to be unplugged
from the radio and removed, and then the batteries must be removed from the
holder and placed in a charger. Then when charged reverse the process and repeat
after next session, until the socket or connector breaks.
We have developed a kit that includes 2 verified genuine batteries (18650 3500 mAh
and 21700 5000 mAh), a 10A balance and protection board to balance charge and
protect the batteries from shorts, over charging and low voltage, and a chassis
mounted coaxial power jack which requires no soldering.
In addition, a 2A smart charger (optional 3A) is provided or an XT-60 adapter to use
your own charger. All battery connections are spot welded using 100% nickel strips
and insulated with Kapton tape. The above kit will work with both the new internal USB
C charger based radio and upgrade kit, the included coaxial charging port and utilize
your own charger with the XT-60 charging adapter.
Jumper T-16 and Radio Master T16S with USB-C internal Charging:
We also have a 2S 21700 5000 mAh battery pack specifically designed for the for
radios incorporating a USB C based internal charger. The USB-C pack will charge
internally via the C port and does not included the additional balance board nor power
connectors in the kit. This battery will provide at least 1/3 greater flight time than 2
18650 batteries in a holder. An optional LIPO balance charger adapter cable is now
The kit version also provides 8.4V at the charging port when not in use for charging. An optional coaxial
power jack to XT-30 or XT-60 adapter is available to power any 2S gear like an external module or FPV
equipment and for rapid charging using your LIPO charger. Other custom adapter cables are available.
Announcing 5000 mAh 12.6v FPV Battery!
We are currently field testing our 3S 5000 mAh battery pack compatible with DJI goggles.
Introductory price through March 31st is $40 plus shipping. 2S and 4S Available soon. Order here
Photo by Tommy Zegers
21700 Pack Installed